|
| 3 LED light blink at the same time |
 Post date : 2009/5/5 |
| |
Please kindly try below two countermeasures to see if the issue will be solved.
Solution One:
Step one - Entering "Set-Up" mode:
At power off status, press "Power ON" and "Mark" buttons simultaneously for 5 seconds, and then the three LED will flash 5 times and stop at light on mode. You can release the buttons when 3 LED are all on.
Step two - Clear Disk Function:
Hold "Mark" button for 5 seconds to all 3 LED lights blink sequentially, then release the button to clear disk storage space.
Soluton 2: Upgrade "AGL3080 V2.3" firmware into AGL3080:
If this doesn't sovle the 3 LED blinking, please contact our technical support for further assistance. |
| |
|
|
 |
|
Tel. +886-2-8751-6263
Add. 8F., No.46, Lane 10, Jihu Road, Taipei, Taiwan, R.O.C.
Fax +886-2-8751-6755
E-mail